Used for cable reserve, straight-through, and fiber distribution / scheduling at nodes between backbone and distribution optical cables
View More
Compact structure with modular design
View More
Used for cable reserve, straight-through, and fiber distribution / scheduling at nodes between backbone and distribution optical cables
View More
Used for cable reserve, straight-through, and fiber distribution / scheduling at nodes between backbone and distribution optical cables
View More
The cabinet is high-temperature molded from high-strength aviation-grade SMC (glass-fiber-reinforced unsaturated polyester), offering long...
View More
The cabinet is high-temperature molded from high-strength aviation-grade SMC (glass-fiber-reinforced unsaturated polyester), offering long...
View More
Meet the terminal wiring and protection of 2 Φ8 ~ 12 optical cables and 1 patch splitter distribution tail fiber (or leather optical cable)
View More
Fulfill the terminal wiring and protection of 2 Φ8 ~ 12 optical cables and 1 patch splitter distribution tail fiber (or leather optical...
View More
Meet the terminal wiring and protection of 1 ~ 2 Φ8 ~ 15 optical cables and 4 patch splitter distribution tail fibers (or leather optical...
View More
Cable ports: 1 uncut cable port (for diameter 10~17.5 mm), 1 branch cable port (for diameter 10~17.5 mm), 16 drop cable ports (for 2×3 flat...
View More
Simple and fast installation, good heat dissipation, high shielding
View More
Open design, solid structure, wide variety, easy installation, beautiful appearance
View More
The cabinet is a sheet metal cabinet body with high strength and beautiful appearance
View More
The cabinet adopts Baosteel's high-quality cold-rolled steel plates or imported coil plates
View More
Open design, solid structure, wide variety, easy installation, beautiful appearance
View More
The cabinet adopts Baosteel's high-quality cold-rolled steel plates or imported coil plates
View More
Open design, solid structure, wide variety, easy installation, beautiful appearance
View More
The cabinet adopts Baosteel's high-quality cold-rolled steel plates or imported coil plates
View More
With a modular architecture over Ethernet and RS485 bus, the cabinet enables effective control of power and micro-environment conditions...
View More
Standard distribution architecture: Breakers + copper busbars with orderly circuit layout for stable, reliable supply
View More
Low total cost
View More
Independent indication of power supply operation
View More
Primarily three-phase four-wire supply; branch circuits are protected by feeder circuit breakers
View More
Monitoring units are managed by the main monitor; data collected by each unit is sent to the main monitor via RS485 for unified management
View More
Optional voltage range 100 VDC-1000 VDC; optional current range 10 A-160 A
View More
Multiple optional AC (inverter) input circuits
View More
Compact size, attractive appearance, simple installation, and easy operation
View More
Phase-change energy storage with strong thermal insulation: All six sides of the base-station battery thermostatic enclosure feature...
View More
Wide AC input voltage range: Single-phase 110 V~280 V; starts at 165 V; after start, rated current output from 187 V~280 V; current-limited...
View More
Strong environmental adaptability: Multiple mounting options for diverse environments
View More
Supports wall-mount and pole-mount installation for indoor and outdoor environments
View More
Flexible backup duration: The 1 kW all-in-one supply can house 10 / 20 Ah batteries to meet different backup-time requirements
View More
Power backup: Automatically switches to battery on utility loss; battery capacity configurable as needed
View More
Fully enclosed natural convection cooling, die-cast aluminum enclosure, IP65
View More
Fully digital: Fully digital interleaved PFC innovative control with limited bipolar ZVS full-bridge topology, current-doubler rectifier...
View More
Wide allowable input voltage range: Modules accept grid input from 90 Vac~300 Vac
View More
Easy installation: Standardized wall-mount design-typically fixed to the wall for simple installation
View More
Compact design: Wall-mounted, small footprint, light weight, easy installation, flexible configuration
View More
Integrated optics and power solve equipment power: supply and signal transmission, enabling centralized monitoring and maintenance of...
View More
Low excess loss
View More
Full series of SC, LC, FC, and ST connector types with strong compatibility
View More
Excellent mechanical performance, temperature characteristics, and flame retardancy.
View More
Standard: supports full-duplex and half-duplex modes
View More
Excellent mechanical performance and temperature characteristics
View More
Loss is insensitive to transmission wavelength, meeting multi-wavelength needs
View More
Excellent mechanical performance and temperature characteristics
View More
Designed for direct mounting in 19-inch standard racks to distribute optical signals; easy installation and use, impact- and...
View More
Excellent mechanical performance and temperature characteristics
View More
Welded sheet-metal frame with high structural strength; enclosure protection rating IP55 or higher
View More
FRP offers light weight, high strength, corrosion resistance, and strong electrical insulation; ingress protection IP55 or above; rust- and...
View More
Shelter body uses container-style construction with purpose-built container panels
View More
Welded sheet-metal frame with high structural strength; enclosure protection rating IP55 or higher
View More
FRP construction: light weight, high strength, corrosion resistance, and strong insulation; ingress protection IP55 or above
View More
Mainly used on rooftops, street sides, in mountainous areas, along railways, and in high / low-temperature outdoor scenarios. It meets needs...
View More
Frame structure with sandwich-panel walls plus top and bottom for high protection; enclosure rating IP55 or higher; rust- and...
View More
Welded sheet-metal frame with high structural strength; ingress protection IP55 or above
View More
Robust materials with thermal insulation, fire resistance, waterproofing, moisture protection, leak resistance, lightning protection...
View More
Welded sheet-metal frame with high structural strength; enclosure protection rating IP55 or higher
View More
Rated power is the total possible instantaneous discharge capacity of the system, usually in kilowatts (kW) or megawatts (MW).
Energy is the maximum energy stored (power rate in a given time), usually described in kilowatt-hours (kWh) or megawatt-hours (MWH).
Peak-valley arbitrage
To reduce corporate electricity costs, utilize the difference in peak-valley electricity prices, charge in valley periods and flat periods, and discharge in peak and peak periods.
Balance demand electricity charges
Energy storage systems can smooth out peak loads, eliminate peak loads, smooth electricity curves, and reduce demand electricity charges.
Dynamic capacity expansion
The user's transformer capacity is fixed. Generally, when the user needs the transformer to be overloaded during a certain period, the transformer needs to be expanded. After installing a matching energy storage system, the transformer load can be reduced during this period by discharging energy storage, thereby reducing the cost of transformer capacity expansion and transformation.
Demand-side response
After installing the energy storage system, if the power grid issues a demand response, customers do not need to limit electricity or pay high electricity charges during this period. Instead, they may participate in demand response transactions through the energy storage system and obtain additional compensation.
Basic information: electricity type, basic electricity price, time-sharing period/time-sharing electricity price, and the company's electricity shutdown production situation;
According to the type of electricity, time-sharing period, and electricity price, preliminarily determine the energy storage time-sharing charging and discharging strategy, determine whether to charge by capacity or by demand, understand the company's production situation, and the annual available time of energy storage.
Load power consumption data: power load data for the past year, average/maximum load power, transformer capacity;
Calculate the energy storage construction capacity based on load data and transformer capacity; Detailed calculation corresponds to the load curve data under each transformer connected, which is used to design the system charging and discharging time control logic and system economic calculation.
Primary power system diagram, plant floor plan, distribution room layout, cable trench direction diagram, reserved space, etc.
Used to determine the installation location of the energy storage system, the location of the access transformer, and the design of the access plan.
The power of energy storage charging + the maximum load during the period should be less than 80% of the transformer capacity to prevent the transformer capacity from being overloaded when the energy storage system is charging.
The load during the peak period of daytime electricity prices should be greater than the peak power of energy storage discharge.
Providing only monthly/annual power consumption cannot reflect the 24-hour power load of the enterprise every day, and cannot calculate the energy storage configuration capacity.
Generally speaking, if the power user in the low-voltage grid-connected energy storage project has only one transformer, the power load data provided is consistent with the transformer load data. At this time, the actual installed capacity can be preliminarily determined based on the total load data and transformer capacity; if the power user has multiple transformers operating at the same time, the power load data provided is the total load of various transformers, which cannot reflect the actual load of each transformer. Therefore, it is necessary to understand the load data of each transformer to determine the actual installed capacity.
At present, industrial and commercial photovoltaic storage projects can be achieved through AC coupling of energy storage and photovoltaics. Growatt can achieve energy priority utilization and increase the utilization ratio of photovoltaic energy by monitoring and controlling the integrated energy storage cabinet and photovoltaic inverter and setting the "load priority" mode using the energy management system.
Home energy storage systems can store excess electricity through solar panels during the day and use this stored electricity at night, thereby reducing the need to purchase electricity during peak hours. This can significantly reduce electricity bills, especially in areas with high electricity prices.
The life of a home energy storage system is usually between 10 and 15 years, depending on the battery type, frequency of use, and maintenance. Many energy storage systems provide long-term warranty services to ensure long-term stable operation of the equipment.
The base station energy storage solution generally adopts a redundant design to ensure that it can quickly switch to the backup power supply when the main power fails or the power fluctuates, to keep the base station running 24/7 uninterruptedly. Through the intelligent energy management system, the power status is monitored in real-time, and the power supply is automatically adjusted to maximize the stability and reliability of the system and ensure the continuity of communication services.
Our energy storage solution is flexible in design and can be seamlessly integrated with various existing base station power systems. The modular design can better adapt to different types of base stations, reducing installation time and complexity. The scalable design facilitates future upgrades and expansions according to needs.
We're here to answer your questions and provide the energy solutions that best fit your needs.

