The GDTA53 hybrid opto-electric cable places single-mode or multimode fibers in loose tubes made of high-modulus polyester filled with water-blocking compound. A metallic strength member sits at the cable core center; for some fiber counts, polyethylene is extruded over the metallic strength member. Loose tubes and insulated copper conductors of the required size are stranded around the central strength member into a compact round core, with interstices filled with water-blocking compound. After longitudinal wrapping with coated aluminum tape, a polyethylene inner sheath is extruded; double-sided chrome-plated coated steel tape (PSP) is corrugated and longitudinally wrapped, then a polyethylene outer sheath is extruded to form the finished cable.
Send Message Get Price
| Product Specification | Reference OD (mm) | Reference Weight (kg/km) | Allowable Tensile Load Long/Short Term (N) | Allowable Crush Load Long/Short Term (N/100mm) | Reference Structure |
| GDTA53-02-24Xn+2×1.5 | 15.1 | 290 | 1000/3000 | 1000/3000 | Type I Structure |
| GDTA53-02-24Xn+2×2.5 | 15.5 | 312 | 1000/3000 | 1000/3000 | Type II Structure |
| GDTA53-02-24Xn+2×4.0 | 17.8 | 358 | 1000/3000 | 1000/3000 | Type II Structure |
| GDTA53-02-24Xn+2×5.0 | 18.6 | 390 | 1000/3000 | 1000/3000 | Type III Structure |
| GDTA53-02-24Xn+2×6.0 | 19.9 | 435 | 1000/3000 | 1000/3000 | Type III Structure |
| GDTA53-02-24Xn+2×8.0 | 20.8 | 478 | 1000/3000 | 1000/3000 | Type III Structure |
| Conductor Cross-section (mm²) | Max. DC Resistance of Single Conductor (20°C) (Ω/km) |
Insulation Resistance (20°C) (MΩ.km) Between each insulated conductor and other interconnected metals in the cable |
Insulation Withstand Voltage (kV, DC 1 min) | ||
| Between Conductors | Conductor to Metal Armor Tape | Conductor to Steel Wire | |||
| 1.5 | 13.3 | Not less than 10000 | 5 | 5 | 3 |
| 2.5 | 7.98 | ||||
| 4.0 | 4.95 | ||||
| 5.0 | 3.88 | ||||
| 6.0 | 3.30 | ||||
| 8.0 | 2.47 | ||||
Note: Specifications are subject to change without prior notice for product improvement. Data Sheet
supply and signal transmission, enabling centralized monitoring and maintenance of device power
Improves power reliability and reduces power-supply coordination and maintenance
Lowers procurement cost and saves installation expense
Precisely controlled fiber excess length ensures excellent tensile performance and temperature characteristics
Primarily used in distributed base-station DC remote power systems connecting BBU and RRU
Suitable for direct-buried installation
It is suitable for various power consumption scenar ios such as residential buildings and commercial office buildings
We're committed to providing prompt, professional support to ensure your energy needs are always met with the highest level of service.
We're here to answer your questions and provide the energy solutions that best fit your needs.