FTTA base station remote optical cable is dedicated to fiber signal transmission at mobile base stations, primarily connecting BBU and RRU/RRH antenna units for 4G/5G base stations, indoor DAS, small cells, and indoor/outdoor communications equipment cabling. The product uses a single-mode dual-fiber design supporting G.657A2 / G.652D fiber, with tight-buffered construction, high-modulus aramid yarn reinforcement, and a black LSZH flame-retardant sheath, combining optical performance with flexibility, tensile strength, and outdoor environmental adaptability.
Send Message Get Price
| Parameter | Technical Specification |
| Fiber Type | Standard G.652D single-mode fiber; optional G.657A1/A2 bend-insensitive fiber |
| Operating Wavelength | 1310 nm, 1550 nm; suitable for 4G/5G CPRI and eCPRI signal transmission |
| Fiber Construction | Precision tight-buffered structure; crush-resistant, bend-resistant, no core displacement |
| Strength Member | High-modulus aramid yarn full wrap; high tensile strength and vibration buffering |
| Sheath Material | LSZH low-smoke zero-halogen flame-retardant; optional TPU abrasion-resistant reinforced material |
| Protection Rating | Finished connector IP67/IP68 dustproof and waterproof; salt-fog resistant and highly weatherable |
| Operating Temperature | -40℃~+75℃ |
| Storage Temperature | -50℃~+85℃ |
| Service Life | Outdoor standard installation ≥8 years |
| Environmental Standard | Compliant with RoHS |
| Quality System | ISO9001 quality management system certified |
| Parameter | Φ5.0 mm Slim Lightweight Version | Φ7.0 mm Standard Reinforced Version |
| Cable Outer Diameter | 5.0mm±0.2mm | 7.0mm±0.2mm |
| Unit Weight | ≈22kg/km | ≈38~42kg/km |
| Sheath Characteristics | Standard thin wall, excellent flexibility | Thickened sheath with upgraded abrasion and UV resistance |
| Aramid Configuration | Standard amount for typical tensile needs | Full fill with ample tensile margin |
| Long-term Allowable Tensile Load | ≥300N | ≥450N |
| Short-term Installation Tensile Load | ≥400N | ≥600N |
| Min. Static Bend Radius | ≥50mm | ≥70mm |
| Min. Dynamic Bend Radius | ≥25mm | ≥35mm |
| Typical Fiber Count | 2 cores (mainstream) | 2 cores / 4 cores universal |
| Compatible Connectors | Compact ODVA, NSN, LC waterproof connectors | ODVA, ODC, FULLAXS and other standard large waterproof connectors |
| Product Advantages | Slim, flexible, lightweight, easy ducting, suited to tight spaces, high cost performance | High mechanical strength, abrasion- and sun-resistant, higher installation tolerance, strong outdoor durability, engineering standard |
| Limitations | Weaker abrasion and crush resistance; not for frequent dragging or prolonged open-air UV exposure | Slightly stiffer cable; less flexible for tight-duct routing |
Note: Specifications are subject to change without prior notice for product improvement. Data Sheet
dual-core single-mode fiber meets dual-path optical transmission needs between FTTA base station equipment.
bend-insensitive G.657A2 or standard G.652D single-mode fiber configurable per project.
precision tight buffering improves crush and bend resistance.
operating −40℃~+75℃, storage −50℃~+85℃, suited to indoor and outdoor base station environments.
ODC, NSN, FULLAXS, LC waterproof connectors and more configurable per project.
It is suitable for various power consumption scenar ios such as residential buildings and commercial office buildings
We're committed to providing prompt, professional support to ensure your energy needs are always met with the highest level of service.
We're here to answer your questions and provide the energy solutions that best fit your needs.