GJYXFCH self-supporting non-metallic reinforced butterfly drop cable is mainly intended for subscriber drop segments in FTTH networks, and is also suitable for subscriber drops in FTTO, FTTB, and other fiber access networks. The optical fiber is placed at the cable center with two parallel FRP non-metallic strength members on both sides, extruded with a white or black LSZH flame-retardant jacket. An independent steel messenger wire serves as an additional self-supporting strength member, improving tensile performance for self-supporting drop installation.
Send Message Get Price
| Product Model | GJYXFCH - 4 fibers or fewer |
| Product Type | Self-supporting butterfly drop cable with non-metallic strength members |
| Fiber Count | 4 fibers or fewer |
| Fiber Type | B1.1 / B1.3 / B6a / B6b |
| Primary Strength Members | Two parallel FRP non-metallic strength members |
| Self-Supporting Member | Single steel messenger wire |
| Jacket Type | Low-smoke zero-halogen (LSZH) flame-retardant jacket |
| Jacket Color | White / Black |
| Dimensions | 2.0mm × 5.0mm |
| Applicable Networks | FTTH / FTTO / FTTB |
| Operating Wavelength | B1.1, B1.3 (G.652) | B6a (G.657A) | B6b (G.657B) |
| 1310nm | ≤0.45dB/km | ≤0.40dB/km | ≤0.60dB/km |
| 1550nm | ≤0.30dB/km | ≤0.30dB/km | ≤0.50dB/km |
| Cable Model | Fiber Count | Fiber Type | Allowable Tensile Load (N) | Allowable Crush Load (N/100mm) | Bend Radius (mm) | |||
| Long-term | Short-term | Long-term | Short-term | Static | Dynamic | |||
| GJYXFCH | 4 fibers or fewer | B1.1, B1.3 | 300 | 600 | 1000 | 2200 | 30 | 60 |
| B6a | 300 | 600 | 1000 | 2200 | 15 | 30 | ||
Note: Specifications are subject to change without prior notice for product improvement. Data Sheet
Two parallel FRP strength members on both sides of the fiber provide strong crush resistance and protect the optical fiber.
A single steel messenger improves tensile strength for self-supporting FTTH subscriber drop runs.
Compatible with B6-series bend-insensitive fiber for indoor drops with bends, corners, and tight spaces.
The butterfly profile is compact and easy to route, pull through conduit, and install at the subscriber end.
The center groove simplifies jacket stripping and fiber splicing for faster installation and maintenance.
Low-smoke zero-halogen jacket supports indoor cabling safety and environmental requirements.
It is suitable for various power consumption scenar ios such as residential buildings and commercial office buildings
We're committed to providing prompt, professional support to ensure your energy needs are always met with the highest level of service.
We're here to answer your questions and provide the energy solutions that best fit your needs.