The J-net IM series BBU special comprehensive cabinet is to meet the needs of 5G network construction, adapt to the characteristics of high power consumption and large concentration of BBU, change the current situation of space use and inefficient cooling caused by different airflow organizations of BBU equipment, achieve rapid deployment in the existing computer room, and take into account the future development needs of other high power consumption equipment in the edge computer room. It is dedicated to the customized comprehensive cabinet for the installation of 5G BBU main equipment.
Send Message Get Price
| J-net IM-CK02 BBU Vertical Insertion Frame Parameter Table | |
| Dimensions (W x H x D MM) | 482X 710.5X 400 |
| Material | Cold rolled steel sheets |
| Plate thickness | 1.5MM |
| surface treatment | Spray plastic |
| Installation | Rack mounting |
| Allow BBU air inlet mode | Left in and right out, right in and left out |
| Use cabinet width dimensions | 600 Width |
| Number of applicable BBUs | 5 sets |
| Standard configuration | Ground copper bar, air deflector, sealed blind, frame |
| Optional Configuration | Speed regulation fan control system, temperature control fan control system |
| J-net IM-CK02 BBU Vertical Insertion Frame Parameter Table | |
| Dimensions (W x H x D MM) | 482X 843X 400 |
| Material | Cold rolled steel sheets |
| Plate thickness | 1.5MM |
| surface treatment | Spray plastic |
| Installation | Rack mounting |
| Allow BBU air inlet mode | Left in and right out, right in and left out |
| Use cabinet width dimensions | 600 Width |
| Number of applicable BBUs | 4 pc.s |
| Standard configuration | Ground copper bar, air deflector, sealed blind, frame |
| Optional Configuration | Speed regulation fan control system, temperature control fan control system |
| J-net IM-FS01 Fan Module Parameter Table | |
| Dimensions (W x H x D MM) | 443X 150X 50 |
| Material | Cold rolled steel sheets |
| surface treatment | Spray plastic |
| Number of Fans | 3PCS |
| Specifications fans | -48V 12038 DC fan |
| Methods | Physical switch + fixed temperature control (on at 35°C) |
| J-net IM-FS02 Fan Module Parameter Table | |
| Dimensions (W x H x D MM) | 447X 280X 58 |
| Material | Cold rolled steel sheets |
| Plate thickness | 1.2MM |
| surface treatment | Spray plastic |
| Number of Fans | 3PCS |
| Specifications fans | -48V 12038 DC speed regulating fan |
| Methods | Physical Switch + Smart Fan Controller |
| Comprehensive Cabinet Parameters for J-net IM-RACK01 BBU | |
| Dimensions (W x H x D MM) | 2200X 600X 600 |
| Material | Cold rolled steel sheets |
| Plate thickness | Frame and load-bearing components 1.5, remaining 1.0 |
| surface treatment | Spray plastic |
| Installation | Floor-mounted installation |
| Total capacity | 47U |
| Route mode | Front and rear vertical wire management racks, three-wire separation |
| Number of BBU inserts that can be installed | 2 sets |
| Number of BBUs that can be installed | 10 |
| Air intake method | Forward wind |
| Optional Configuration | |
| PDU(power distribution unit) | 2 inputs, 20 outputs, total input 125A, branch output 32a |
| DCDU | Input voltage -48V, input current 120a, dual input, 10 * 30a branch output |
| FAN MODULE | 4-bit cabinet top fan module |
| Brush trimming rack | 19-inch mounting |
| Passive Wave Separation Frame | 19-inch mounting |
| ODF unit box | Optional 12-72 core |
| Blanking Plate | Optional 1U ~ 3U |
| Ground copper bar assembly | 19-inch mounting |
Note: Specifications are subject to change without prior notice for product improvement. Data Sheet
Welded structure, suitable for on-site installation
High-quality cold-rolled steel sheet production, good strength, light weight of the whole machine
Full frontal design for easy operation and maintenance
The vertical sub-frame air duct adopts forward air inlet and rear air outlet, and each BBU has an independent air duct
Modular sealing plate, flexible and fast adjustment
Strong, weak current, fiber optic three-wire separation, each independent route channel
Reasonable diversion structure, minimize the inlet and outlet resistance, and ensure the optimal heat dissipation performance of the frame
Good compatibility, each sub-frame can meet the fixed installation of BBU (2U) * 5 devices of mainstream equipment manufacturers such as Huawei, ZTE, Nokia, China Telecom, Ericsson, etc
Independent fan speed control system options, including three adjustable fans, physical switches and fan speed adjustment controllers
It is suitable for various power consumption scenar ios such as residential buildings and commercial office buildings
We're committed to providing prompt, professional support to ensure your energy needs are always met with the highest level of service.
We're here to answer your questions and provide the energy solutions that best fit your needs.